Here you will find the return bill for devices or sensors for inspection or repair.
Please write us in the return bill a description of the error as accurate as possible and enclose the return bill with the goods.
Notice:
We try hard to repair all devices if possible. Only if there is no other way, we exchange devices or assemblies. Our endeavor is to avoid electronic waste wherever possible.
We are convinced that it is more sustainable, even if it is a little more "inconvenient", costs more time and therefore money. We hope you will support us in our endeavor with some patience for processing.
We see this as an aspect of "green electronics".
Your ESERA Team
Demonstration project for the Loxone Miniserver from the manufacturer Loxone. In this demo we would like to show you how you can connect a 1-Wire Controller / ECO Controller with a Miniserver from Loxone and exchange data.
Note: We created this demo a few years ago, but it should work comparably with the current version.
The software and your documentation is provided "as is" and without any warranty for function, correctness or freedom from errors.
Translated with www.DeepL.com/Translator (free version)
A USB driver is required for various products. Normally, a corresponding driver is loaded automatically under Windows. If this is not the case, you can find the appropriate driver for our USB interfaces here (external Link to FTDI): FTDI VCP Driver
Here we provide you with a tool for configuring the Ethernet interface of the eBus Coupler Ethernet, Part No. 12002.
With the "Network Config Tool," you can perform the following configurations on your eBus Coupler Ethernet:
Important note: When running the software, you may encounter a security warning, which you can safely ignore. The software has been thoroughly checked and contains no malware.
The ECO-Dashboard 100 software is a fully automatic visualization for the ECO Sensor-Gateways and is based on the Auto-E-Connect system.
No settings have to be made for the visualization. The software exchanges all data on the connected sensors and actuators with the ECO Sensor-Gateway and displays the appropriate instruments. In addition, logging of sensor values is started in the background and graphs are written.
The ECO Dashboard 100 is a good example of how ESERA's Auto-E-Connect system works.
No knowledge about the ECO Sensor-Gateway is necessary. Just enter the IP address of the ECO Sensor-Gateway and off you go. This is how visualization is fun! :-)
The software is intended for:
The software is provided free of charge by ESERA. Based on this software, your visualization could also be implemented.
System requirements: Windows 7 or newer or Linux in Wine environment.
ECOTERM Terminalsoftware: Your Gateway to the Data World
Discover ECOTERM, the ideal terminal software for data visualization and text communication. This powerful solution has been specifically designed to seamlessly integrate with eBus couplers and eBus ECO Gateways. But ECOTERM offers even more – it serves as a universal solution for serial interfaces via COM-Port and TCP/IP. Immerse yourself in the world of data connectivity with ECOTERM.
ECOTERM is a product of ESERA GmbH Germany.
The software will be available shortly. Please be patient.
The OWOS software is a project by Rayk Raue.
Please send technical support requests to support@esera.de.
The project was first published in the IP-Symcon Forum. Here you can find further information. Questions about software, e.g. installation, can also be asked in the IP-Symcon Forum.
Warning: This is a Windows exe file, which can be reported as malicious by your antivirus program.
This application is checked, so you can ignore this message.
The ESERA-Station 200 is a hybrid system consisting of an ECO 200 controller and a quadcore Linux computer. The Station 200 is more like another central controller. It is an open platform, is a combination of an embedded computer and professional ESERA components.
It is an open automation control center built on standards. The ESERA-Station is usable for a wide range of software packages, Codesys*****, IP-Symcon, OpenHAB, FHEM, NodeRed and many more.
We provide the following software for download:
Documentation for connector and cable assignment of 1-Wire cable connections.
Dallas, the inventor of the 1-Wire technology, has a recommended assignment of CAT cables. This is used by ESERA, among others.
Here you can find manuals for the Modbus/TCP and Modbus/RTU interfaces of the different ESERA gateways.
The manuals are divided according to the interface ports of the gateways.
For the 1-Wire Gateways without web server and access point, please use the interface manual Modbus V1.
Example: 1-Wire Gateway 10, 1-Wire Gateway 20 => Interface manual Modbus V1
For the ECO Gateways with web server and access point, please use the interface manual Modbus V2.
Example: ECO 110, ECO 160, ECO 501 - ECO 503, ECO 608 => Interface manual Modbus V2
Planning aid for 1-Wire systems
Here we offer you a small Excel tool for calculating your 1-Wire system, consisting of sensors, actuators and 1-Wire controller / ECO controller of the 1-Wire system or 1-Wire network. You can extend the Excel tool as you wish and thus build up a nice system overview.
With the Excel tool you can calculate the required space (TE = partial units) in the control cabinet. Furthermore it is possible to calculate the power of all sensors and actuators in relation to the 1-Wire controller / ECO controller and a good/overload display.
With the ESERA planning aid you can achieve an optimization of your 1-Wire system and avoid overloads.
Here you will find the programming manual for all EC and ECO Gateway 1-Wire / IT/IoT Switch (formerly 1-Wire Controller).
The programming manual contains:
- The technical documentation for sensors and actuators
- All commands for the gateway with 1-Wire interface and IT/IoT Switch
- Explanation of technical details of the gateways 1-Wire
- Instructions for the interfaces, such as for the ECO110, ECO501, ECO608 EIoT1000 etc.
The programming manual can also be found in ESERA Config Tool 3, under the DOCU tab.
Notice:
All our Gateways are internally divided into an I/O (1-Wire, eBus) and Interface side. The programming manual described here refers to the I/O (1-Wire) side. For the interface side, there is an "Interface manual" available here in the download area.
Here you will find the interface manual for all ECO Gateway with web server and access point.
The interface manual among others for the following ECO Gateway types:
- ECO Gateway 1-Wire, ECO501 - ECO 502, ECO 608, ECO 1206, ECO 1207, ...
- ECO IT/IoT Switch, ECO503
- ECO Gateway eBus, ECO305, ...
- UMS2205 Environmental measuring station
Here you will find the one firmware for EC 1 Gateway, 1-Wire Controller 1, 1-Wire Controller 2 and the ESERA-Station 200 V1 (manufacturing year until 2020).
Important, the latest firmware version for all gateway versions can be found via the Config Tool 3, under the tab "DATA,DEBUG", "DOWNLOAD FIRMWARE FILE".
Please download the software "Config Tool3" here from the downlaod area.
We provide two versions:
Note: Please download the firmware only if you are sure that it is the correct firmware for your device. If you are unsure, please contact us by mail via support@esera.de